How can we help?
Answers from the same local team that built your network. Can't find it here? A real person in Newark picks up the phone.
All systems operational
Home fiber network, our Newark core & NOC, Home Phone and billing are running normally.
- Uptime · 30d
- 99.98%
- Avg latency
- 4.2 ms
- Incidents
- 0
- Scheduled
- 1
| Service area | Latency | Last 30 days | Uptime | Status |
|---|
Having trouble but everything shows green? Report a problem at your address or call (740) 555-0199.
Quick help
Wi-Fi feeling slow?
Fiber rarely slows down — but Wi-Fi can. Try these steps in order before you call. Most problems are solved by step two.
-
Restart your router
Unplug the Corvane router's power cable, wait 30 seconds, and plug it back in. Give it 3 minutes to come back. Leave the small fiber box (the ONT) alone for now.
-
Check the lights on your fiber box
The ONT is the small white box where fiber enters your home — usually in a garage, basement or utility closet. Its lights tell us where the problem is.
- PWR solid green — box has power.
- PON solid green — fiber signal is good.
- LAN blinking green — data is flowing to your router. Normal.
- LOS red (solid or blinking) — no fiber signal. Call us; it's on our side.
- All lights off — check the outlet and the power adapter.
-
Give your router some space
Wi-Fi travels best through open air. Move the router out of cabinets and off the floor, ideally in the middle of your home. Big homes or thick plaster walls? A mesh extender fixes dead zones.
-
Run a wired speed test
Plug a laptop into the router with an Ethernet cable and run a speed test. If the wired result matches your plan, the fiber is fine and it's a Wi-Fi coverage issue. If it's well below your plan, we want to know.
Parental controls & the Corvane Wi-Fi app
Every Corvane router works with our free Wi-Fi app for iPhone and Android. See who's connected, pause the internet for dinner, set bedtime schedules for the kids' devices, turn on family-safe filtering, and share a guest network with a QR code.
A website says I'm on a VPN or proxy
You're not doing anything wrong. Corvane's addresses are registered as residential broadband — every home gets its own public IPv4 address from our pool, plus native IPv6. But some websites and streaming services rely on IP databases that are slow to catch up with newer local providers, and can mistake a home connection for a VPN, proxy or business network.
-
Restart your router for a fresh address
Unplug the Corvane router for 30 seconds and plug it back in. It will request a new lease and may receive a different public IPv4 address. Then try the website again.
-
Check your public IP address
Look up the address the website sees on our network information page (or search "what is my IP"). Write it down — it looks like 198.51.100.23.
-
Tell us — we'll get it corrected
Send us the website's name and your IP address. We'll confirm the address is one of our residential ranges and file a correction with the major IP-location databases (such as MaxMind, IPinfo and IP2Location). Most fixes take effect within 1–2 weeks.
Report a flagged address
Moving? We'll make it easy.
Give us two weeks' notice and we'll line things up so you're online the day you get the keys.
Take Corvane with you — free
- No transfer or reinstall fee
- Keep your plan and your locked price
- Bring your router — we'll set up the new ONT
Leaving the area? No penalty.
- Cancel anytime with no early termination fee
- Your last bill is prorated to the day
- Return equipment within 30 days — drop-off or prepaid box
Frequently asked questions
No answers match ""
Ask us directly — our team replies within one business day, usually much sooner.
Three ways to reach us
Leave a message
Tell us what's going on and when to reach you. We reply within one business day.
Send a message